Category

Density Altitude Calculator — ISA Effective Altitude from Temperature, Pressure & Humidity

Calculate density altitude (the ICAO ISA effective altitude) from temperature, pressure and humidity. Shows results in feet and metres, plus air density and comparison to the 1.225 kg/m³ standard. Supports metric and US imperial units.

0 calculations

Calculation Parameters

°C
hPa
Use the absolute station pressure, not the altimeter setting.
%

Enter Parameters

Fill in the form on the left and click "Calculate"

This density altitude calculator tells you the effective altitude of your aircraft compared to the ICAO International Standard Atmosphere (ISA) standard conditions. It is essential information for predicting airplane engine and aerodynamic performance. Below we explain the density altitude definition, the density altitude formula, and how to use the calculator. It works with both the US/imperial (°F, inHg, feet) and metric (°C, hPa, metres) systems.

What is density altitude?

Density altitude is another way of expressing air density, mainly used in the aviation industry by pilots. Engine performance and aerodynamic lift depend strongly on air density. Too little, and the engine may struggle to provide enough forward thrust and the wings enough lift — which could spell trouble for a smooth flight.

Density altitude is the calculated altitude based on the ICAO International Standard Atmosphere (ISA) model (ICAO stands for the International Civil Aviation Organization). At zero altitude, this model sets the air temperature to 15 °C (59 °F), air pressure to 1013.25 mbar (29.921 inHg), relative humidity to 0%, and air density to 1.225 kg/m³ (0.076474 lb/ft³).

In the model, as you go up in altitude the air gets less dense and the air pressure decreases. Therefore you can relate altitude to air density. Of course, the real world will hardly ever have the same atmospheric conditions as the standard model, so there will most probably be a difference between your density altitude and the air's real density around the plane.

Finding the density altitude means calculating the equivalent height in the ISA model that has the same air density as the air currently around the plane. We can then use the density altitude (a.k.a. air density) to predict plane engine performance and how much lift the wings will generate. It is also one of the parameters used to find true airspeed.

Traditionally, a pilot would keep a density altitude chart in the cockpit to look up the density altitude:

  • Look up a weather report from the nearest weather station to get the latest altimeter setting.
  • Read off the corresponding pressure-altitude conversion factor and add the station elevation.
  • Find the current air temperature on the chart and travel up to the pressure-altitude line.
  • Read across to find the density altitude.

It is a lot simpler to use this calculator instead (though a paper chart is a good backup when in flight).

How to calculate density altitude? — Density altitude formula

The density altitude calculation formula finds the density altitude (or geopotential altitude) H in kilometres in terms of a single variable, the air density ρ in kg/m³:

H = 44.3308 − 42.2665 × ρ^0.234969        [H in km, ρ in kg/m³]

The constants are derived from the ISA model's constants. To get the air density itself, the calculator uses the ideal gas law extended to moist air from the dry-air pressure, the water-vapour pressure (humidity), and the temperature:

ρ = p_d / (R_d × T) + p_v / (R_v × T)

Where:

  • ρ — air density (kg/m³)
  • p_d — partial pressure of dry air = p − p_v (Pa)
  • p_v — water-vapour pressure = φ × e_s(T) (Pa)
  • R_d = 287.058 J/(kg·K) — specific gas constant for dry air
  • R_v = 461.495 J/(kg·K) — specific gas constant for water vapour
  • T — absolute temperature in Kelvin (T = T_°C + 273.15)
  • φ — relative humidity (0–1); e_s(T) is the saturation vapour pressure (Buck equation)

How to use our density altitude calculator?

  1. Pick your unit system — Metric (SI) or US / Imperial.
  2. Enter the outside air temperature (°C or °F).
  3. Enter the absolute (station) air pressure — hPa/mbar in metric, inHg in imperial.
  4. Optionally enter the relative humidity (leave 0% for dry air).
  5. Press Calculate — you will get the density altitude in feet and metres, plus the air density and how it compares to the ISA standard of 1.225 kg/m³.

Example of finding density altitude

Suppose the air temperature is 30 °C (86 °F), the station pressure is the standard 1013.25 hPa (29.92 inHg), and humidity is 0%. The moist-air formula gives an air density of about 1.164 kg/m³. Plugging this into the density altitude formula:

H = 44.3308 − 42.2665 × 1.164^0.234969 ≈ 0.49 km ≈ 490 m ≈ 1,608 ft

So even though the airfield is at sea level, the warm air makes the aircraft "feel" as if it were flying at roughly 1,600 ft — reducing engine power and lift accordingly. At the ISA standard conditions (15 °C, 1013.25 hPa, dry air) the density altitude is essentially 0 ft, because the air density equals the standard 1.225 kg/m³.

Frequently Asked Questions

Why does high density altitude reduce aircraft performance?
Less dense air means the engine ingests less oxygen and the wings and propeller generate less lift and thrust, lengthening take-off and reducing climb rate.
What raises density altitude?
High temperature, low pressure, high field elevation, and high humidity all lower air density and therefore raise density altitude — a "hot and high" day is the classic danger.
Is density altitude the same as pressure altitude?
No. Pressure altitude assumes ISA standard temperature; density altitude corrects pressure altitude for the actual (non-standard) temperature and humidity.
What is the standard air density?
The ISA sea-level standard is 1.225 kg/m³ (0.076474 lb/ft³) at 15 °C, 1013.25 hPa, and 0% humidity.

Calculation History

Loading...