Category

Heat of Combustion Calculator — Higher Heating Value (HHV) from LHV, Moles of H₂O, and Molar Mass

Calculate the heat of combustion (higher heating value, HHV) of any fuel using Hc = LHV + Hv × nH₂O/nfuel. Supports 11 predefined fuels (methane, hydrogen, propane, gasoline, diesel, ethanol and more) and custom input. Results in kJ/kg, MJ/kg, kJ/mol, BTU/lb, and kcal/kg.

0 calculations

Calculation Parameters

kJ/kg
mol
g/mol
CH₄ — LHV: 50,050 kJ/kg | H₂O: 2 mol/mol | M: 16.043 g/mol

Enter Parameters

Fill in the form on the left and click "Calculate"

What is heat of combustion?

The heat of combustion (also called the higher heating value, HHV, or higher calorific value) is the total amount of energy released when a fuel burns completely and the resulting water vapor is allowed to condense. It is a critical parameter for comparing fuel quality, designing combustion systems, and estimating energy efficiency.

When fuel combusts, one of the byproducts is water vapor (H₂O). The heat of vaporization of this water is often wasted when it escapes as steam. However, the formula for heat of combustion includes the energy needed to produce that water vapor — giving a higher value than the lower heating value (LHV).

How to calculate heat of combustion?

The heat of combustion Hc is calculated using the following equation:

Hc = LHV + Hv × (nH₂O / nfuel)

or equivalently, using mass basis:
Hc (kJ/kg) = LHV (kJ/kg) + Hv (kJ/kgwater) × (nH₂O × 18.015) / Mfuel

Where:

  • LHV — Lower Heating Value: energy released without condensing water vapor (kJ/kg or BTU/lb)
  • Hv — Heat of vaporization of water at 25 °C: 2441.7 kJ/kg (1050 BTU/lb)
  • nH₂O — Number of moles of water produced per mole of fuel combusted
  • Mfuel — Molar mass of the fuel (g/mol)

The difference between HHV and LHV is the latent heat of condensation of the water produced during combustion.

Example: Using the heat of combustion calculator

Let's calculate the heat of combustion for methane (CH₄):

  • LHV of methane = 50,050 kJ/kg
  • Combustion reaction: CH₄ + 2O₂ → CO₂ + 2H₂O → nH₂O = 2 mol per mol CH₄
  • Molar mass of CH₄: M = 16.043 g/mol
  • Water mass ratio = (2 × 18.015) / 16.043 = 2.247 kg H₂O per kg CH₄
  • Hc = 50,050 + 2441.7 × 2.247 = 55,534 kJ/kg

Converting to US customary: 55,534 × 0.42992 ≈ 23,874 BTU/lb

Predefined fuels in this calculator

Fuel LHV (kJ/kg) HHV (kJ/kg) BTU/lb (HHV)
Hydrogen (H₂)119,930141,77060,957
Methane (CH₄)50,05055,53423,874
Propane (C₃H₈)46,35750,34521,642
Ethanol (C₂H₅OH)26,80029,67912,761
Gasoline (C₈H₁₈)44,00047,89720,590

FAQs

What is the difference between HHV and LHV?

The Higher Heating Value (HHV) — also called gross calorific value — assumes all water produced during combustion condenses to liquid, recovering the latent heat. The Lower Heating Value (LHV) — net calorific value — assumes water remains as vapor and that heat is lost. HHV is always greater than LHV.

Why is hydrogen's heat of combustion so high?

Hydrogen has the highest HHV by mass (~141,770 kJ/kg) because (1) its LHV is extremely high — only C–H and C–C bonds produce less energy than H–H bonds — and (2) each mole of H₂ produces one mole of H₂O, which is a large water-to-fuel mass ratio (18.015/2.016 ≈ 8.93 kg/kg).

Where is heat of combustion used?

Heat of combustion is used in:

  • Engine design — internal combustion engines, gas turbines, fuel cells
  • Fuel quality assessment — comparing natural gas, coal, biofuels
  • Waste heat recovery — condensing boilers exploit the HHV−LHV gap to recover water vapor energy
  • Thermochemistry — Hess's law applications and formation enthalpy calculations

What units are used for heat of combustion?

Common units include kJ/kg and MJ/kg in the metric system, BTU/lb in the US customary system, and kJ/mol for molar basis (used in chemistry). This calculator provides results in all of these units simultaneously.

Calculation History

Loading...