Percent Yield Definition
The percent yield is a measure of the effectiveness of a synthetic procedure. Simply put, percent yield tells you how well you carried out your reaction. If you were very careful with your reaction — made sure every molecule reacted and that nothing was lost — your percent yield would be 100%. If you accidentally lost everything, your percent yield would be 0%. If solvent or impurities were still present with the product, your yield could even exceed 100%.
Percent Yield Formula
The percent yield is calculated using the following equation:
Yp = (mexp / mth) × 100
Where:
- Yp — The percent yield (%)
- mexp — The experimental (actual) mass of the product obtained
- mth — The theoretical mass of the product (maximum possible)
This calculator can solve for any of the three variables. Enter any two known values and it will calculate the third.
How to Calculate Percent Yield
- Carry out your chemical reaction and isolate the product.
- Weigh the product you obtained — this is your experimental (actual) yield.
- Calculate or look up the theoretical yield — the maximum possible amount of product based on stoichiometry (use our Theoretical Yield Calculator).
- Divide the experimental yield by the theoretical yield and multiply by 100.
Measurement Systems
This calculator supports both the metric system (grams) and the American/Imperial system (ounces).
| System | Mass unit |
|---|---|
| Metric | grams (g) |
| Imperial (American) | ounces (oz) |
Both experimental and theoretical mass must be in the same unit. The percent yield itself is always a dimensionless percentage.
Percent Yield Interpretation
| Percent Yield | Interpretation |
|---|---|
| = 100% | Perfect (theoretically impossible in practice) |
| 90–99% | Excellent — very efficient reaction |
| 70–89% | Good — typical for careful lab work |
| 50–69% | Average — room for improvement |
| < 50% | Low — significant losses occurred |
| > 100% | Indicates impurities or measurement error |
Example: Percent Yield Calculation
You perform a reaction to produce aspirin (acetylsalicylic acid). The theoretical yield was calculated to be 10.00 g. After the reaction and purification, you obtained 8.50 g.
Yp = (8.50 / 10.00) × 100 = 85.00%
Your percent yield is 85% — a good result for a lab synthesis.
Imperial System Example
You expect 0.353 oz (≈10 g) of product and obtain 0.300 oz (≈8.5 g):
Yp = (0.300 / 0.353) × 100 ≈ 85.0%
Frequently Asked Questions
What is the percent yield?
The percent yield is the ratio of the experimental (actual) yield to the theoretical (maximum possible) yield, expressed as a percentage. It measures the efficiency of a chemical reaction.
Can percent yield exceed 100%?
In theory, no — 100% represents perfect conversion with no losses. However, in practice, a percent yield above 100% can occur if the product is not completely purified (residual solvent, moisture, or byproducts add mass to the measurement). It does not mean more product was created than was theoretically possible.
What is the difference between actual yield and theoretical yield?
The actual (experimental) yield is the amount of product you physically collected and measured after the reaction. The theoretical yield is the maximum amount of product that could form based on the balanced equation and the amount of limiting reagent used, assuming 100% efficiency.
Why is the percent yield never 100% in real reactions?
Real reactions rarely achieve 100% yield due to: side reactions producing unwanted byproducts, incomplete reactions, product lost during transfer between containers, evaporation, or imperfect purification steps. Chemists strive to minimize these losses to maximize efficiency.
How is percent yield related to theoretical yield?
They are directly related: experimental yield = (percent yield / 100) × theoretical yield. This calculator lets you solve for any of the three variables when the other two are known.