Category

Van der Waals Equation Calculator — Real Gas Pressure & Constants a, b

Analyze real gases with the van der Waals equation of state (P + a·n²/V²)(V − n·b) = nRT. Estimate the van der Waals constants a and b from the critical point, compare real-gas vs ideal-gas pressure, and get the compressibility factor Z. Supports American (psi, ft³, °F) and metric (bar, L, °C) units.

0 calculations

Calculation Parameters

Critical point parameters

°C
bar
cm³/mol

Gas state (equation of state)

mol
L
°C

Enter Parameters

Fill in the form on the left and click "Calculate"

What Is the Van der Waals Equation?

This van der Waals equation calculator is a handy tool that lets you analyze the physical properties of real gases. It uses the van der Waals equation — a thermodynamic equation of state that improves on the ideal gas law by accounting for the finite size of molecules and the attractive forces between them.

The equation, introduced by Johannes Diderik van der Waals in 1873, is written as:

(P + a·n²/V²) × (V − n·b) = n·R·T

Solved for pressure, this calculator uses:

P = nRT / (V − n·b) − a·n²/V²
  • P — pressure of the gas
  • V — volume occupied by the gas
  • T — absolute temperature
  • n — amount of substance (number of moles)
  • R — universal gas constant, 8.314462618 J/(mol·K)
  • a — attraction parameter (intermolecular attraction)
  • b — repulsion parameter (effective molecular volume)

Ideal Gas vs. Real Gas

An ideal gas consists of a large number of randomly moving point particles that collide elastically with each other and the walls of the container — this is the kinetic molecular theory. The real gas law modifies it by adding two corrections:

  • Attraction between molecules. Molecules attract one another within a range of several molecular radii. Because there are no gas particles beyond the container surface, molecules near the wall are pulled inward, so the actual pressure on the walls is lower than for an ideal gas. The term a·n²/V² accounts for this.
  • Finite molecular volume. Molecules are particles with a non-zero volume, not point masses. The volume available to the gas cannot drop below a certain constant, so the free volume is V − n·b instead of V.

If both the attraction (a = 0) and the molecular size (b = 0) can be neglected, the van der Waals equation reduces exactly to the ideal gas equation PV = nRT.

Van der Waals Constants a and b

The van der Waals constants are substance-specific. They can be estimated from the parameters of the critical point — the pressure Pc, temperature Tc, and molar volume Vc at which the liquid and gas phases become indistinguishable. A useful relation between the critical parameters is:

8·Pc·Vc = 3·R·Tc

This calculator estimates the constants from the critical pressure and critical molar volume using:

a = 3·Pc·Vc²    and    b = Vc/3

The attraction parameter a reflects how strongly the molecules attract each other, while the repulsion parameter b represents the effective volume occupied by one mole of molecules. Pick one of the built-in gases to auto-fill its critical parameters, or choose “Custom” and enter your own.

Units: American and Metric

The calculator supports two measurement systems. Switch between them at the top of the form and every field updates automatically:

  • Metric: temperature in °C, pressure in bar, molar volume in cm³/mol, volume in liters (L), amount in moles. Constants are reported as bar·L²/mol² (a) and L/mol (b).
  • American (Imperial): temperature in °F, pressure in psi, molar volume in ft³/lb-mol, volume in ft³, amount in lb-mol. Constants are reported as psi·ft⁶/lb-mol² (a) and ft³/lb-mol (b).

Regardless of the system you choose, the result also shows the van der Waals constants and the real-gas pressure in SI units (Pa·m⁶/mol², m³/mol, Pa) and the pressure expressed in Pa, kPa, bar, atm, mmHg, and psi.

A Worked Example — Carbon Dioxide

Take 1 mole of CO₂ in a 22.4-liter container at 25 °C. From the critical data Pc = 73.8 bar and Vc = 94 cm³/mol, the constants are a ≈ 0.196 Pa·m⁶/mol² and b ≈ 3.13 × 10⁻⁵ m³/mol. The van der Waals pressure comes out slightly below the ideal-gas value, because at this density the attractive forces dominate over the excluded-volume effect. The calculator reports the compressibility factor Z = PV/(nRT) so you can see how far the gas departs from ideal behavior (Z = 1).

Frequently Asked Questions

When should I use the van der Waals equation instead of the ideal gas law?
Use it whenever a gas is at high pressure or low temperature (close to condensation), where real-gas effects become significant. At low pressure and high temperature, the ideal gas law is an excellent and simpler approximation.
What does the compressibility factor Z tell me?
Z = PV/(nRT). For an ideal gas Z = 1. Z < 1 means attractive forces dominate (the gas is more compressible than ideal); Z > 1 means the finite molecular volume dominates (less compressible than ideal).
Why is the real-gas pressure sometimes higher and sometimes lower than ideal?
The excluded-volume term (V − n·b) raises the pressure, while the attraction term (a·n²/V²) lowers it. Which effect wins depends on the temperature, density, and the specific constants a and b of the gas.
What happens if the volume is too small?
If the volume is smaller than the excluded volume n·b, the gas cannot physically exist in that state and the equation has no valid solution. Increase the volume or reduce the amount of substance.
Are the constants a and b exact?
They are estimates. This tool derives them from the critical point using a = 3·Pc·Vc² and b = Vc/3. Tabulated experimental values may differ slightly, since real substances are not perfectly described by a two-parameter model.

Calculation History

Loading...